高速、小直径暖通12bet管道系统,安装方便.
Many owners of older homes without forced-air HVAC systems, would like to add central air conditioning and/or heating ducts, 但安装过程的成本和难度让他们望而却步. 管道系统的安装可能需要拆除大面积的墙壁, 地板或天花板, or adding unsightly box chases. 然而, 高速加热和冷却系统通过使用更容易穿过地板的小直径管道将这些改变最小化, 天花板, 和墙蛀牙.
According to the manufacturers, 这些高速系统安静地运行,改善除湿效果, 室内空气混合, and energy efficiency over standard air-delivery duct systems.
高速加热和冷却系统使用特殊的风机盘管和空气处理单元,产生高压空气,迫使其通过小直径管道. 主供应干管是一个矩形或圆形管道,供应空气灵活, 绝缘, 2" diameter plastic feeder ducts. 空气通过管道末端的消声管,然后通过塑料领配件进入房间. 根据制造商的说法,空气的供应速度为每分钟440到1200立方英尺(CFM).
高速系统使用标准的室外冷凝机组用于12bet和热泵系统. 作为一个选项, 可在空气处理装置中安装水盘管,用于锅炉加热或冷冻水冷却. 另外, 在空气处理器上增加一组电热元件可以为高速12bet系统提供加热能力. 高速系统空气处理器可满足18,000年和60,000 BTUH and heating capacities between 24,000年和143年,000 BTUH.
在冷却模式下,迷你风管气流组织系统比传统系统多去除约30%的水分. This results in cooler, dryer air. 即使在较高的温度下,较低的湿度也能创造一个更舒适的环境. The mini-duct air distribution system can be installed in any home, regardless of the design, 建设, or age with little or no remodeling.
The mini-duct air distribution system is quick and easy to install. 小灵活, 绝缘油管的设计,以适应现有的结构,而没有重大的改建. 这种管道所需的空间大约是传统中央12bet的十分之一.
高速气流分配系统由认证的承包商进行分配,也可以直接从制造商或经销商处购买. 然而, 值得注意的是,一些加热和冷却专业人员不熟悉高速管道. 系统通常需要更多的出口(大约每吨冷却需要5个出口), or one outlet for every 2400 BTUs of heating), --adding to material costs and installation time.
微型管道系统的初始成本比传统的同类产品更高.
12bet和制冷协会(ARI)认证高速空气分配系统可用于众多热泵, 12bet, 和热源.
高速加热和冷却系统应该由制造商授权的加热和冷却专业人员安装. 小直径的管道可以穿过楼板搁栅的贯穿部分, unlike systems with standard-sized ducts. Placing air outlets in areas of a room, such as in corners of a 天花板, or beside windows or doors, 能否在不引起居住者不适的情况下,提高室内空气混合物的高速输出.
微型管道系统通常具有制造商自安装之日起1年的质保期. 然而,系统的某些部分可能不在保修范围之内. See store for details.
制造商声称高速气流组织的除湿比传统的强制空气系统更好. In the air conditioning season, 较低的湿度水平可以让居住者感到舒适的恒温器设置在较高的温度, resulting in reduced energy costs. In both heating and cooling seasons, 通过更小的供给线以更高的速度输送空气,可以更有效地混合室内空气, reducing temperature stratification, 并且不需要在窗户或外墙处设置风管出口,以避免出现冷热点.
For installation in existing homes, the 2" supply lines can be fed through joists, 墙蛀牙, and around common obstructions, so that costly and disruptive structural alterations can be avoided. 这对于具有现有体系结构特性的应用程序是有益的, like plaster moldings, would be difficult to change or duplicate. 因为这个原因, 高速系统是最具成本效益的改造方案, 尽管在新建筑中,它们可能比传统的管道系统更昂贵.
工具库PATH技术库存-住房推进技术的伙伴关系